Glunz & Jensen

Rutevejledning Website Kontakt virksomheden

Glunz & Jensen The world´s leading supplier of innovative solutions for the global prepress industry.

💥News from Shanghai. At All in Print China, it was a great opportunity to showcase what Suzhou Aolide CO.,LTD, our mast...
20/10/2026

💥News from Shanghai.

At All in Print China, it was a great opportunity to showcase what Suzhou Aolide CO.,LTD, our master distributor, and have to offer the Chinese market.

We had many great meetings with both existing and new customers, and we’re looking forward to following up on these conversations in the coming months.

A big thank you to Lucky and the Suzhou Aolide team for hosting our customers and helping make the show such a success. 🙌

⚡Upgrade to . Save 25%.Still running mercury tubes? This is the right time to consider the switch.Get 25% off HALO LED ...
06/10/2026

⚡Upgrade to . Save 25%.

Still running mercury tubes?
This is the right time to consider the switch.

Get 25% off HALO LED Kit and upgrade your exposure unit before mercury tubes are no longer available.

⏱️It is a limited offer - valid on new orders placed 1 October – 31 December 2026. Not applicable to previously placed, non-executed orders.

Why wait? Secure your LED upgrade and save while you can.

29/09/2026

Why choose complexity when you can have reliable performance?🤔

Meet Kylin 85T, our compact thermal processor designed to keep your process simple, stable and efficient.

With processing speeds of up to 140 cm/min and support for thermal and UV/conventional plates, Kylin gives printers the flexibility they need without unnecessary complexity.

✅ Consistent processing
✅ Simple operation
✅ Fast, tool-free roller and brush replacement
✅ Remote service access included as standard
✅Compact design

Built on proven technology, Kylin delivers the processing stability you expect in a straightforward and cost-effective package.

So, what makes Kylin a practical choice for modern offset platemaking?
Thomas, our Sales Director for , takes a closer look in this video.

22/09/2026

📦 The final step before shippng.

What does it take to ensure a machine arrives safely on the other side of the world?

In this behind-the-scenes video, we're crating one of our systems, an important step that helps make sure every machine reaches our customers in perfect condition and ready to perform.

These are the moments that define how the journey begins.

Any guesses how long it takes to build a crate like this? 👇

15/09/2026

Two processes. One smart solution.⚙️

What if you could make your flexo platemaking process more efficient, consistent and easier to manage?

That’s exactly what Flex-Combi is designed for.

In this video, Tom De Langhe, our Sales Director EMEA for flexo, shows how it combines drying and light finishing in one compact unit.

Why is it worth watching?👀

You’ll see what Flex-Combi can do for your production:

🟢 Save valuable space
🟢 Process up to six plates at once
🟢 Achieve more consistent results
🟢 Reduce energy consumption
🟢 Improve everyday ergonomics
🟢 Enjoy a quieter working environment

Which of these benefits would make the biggest difference to your production?

Ready to take your service skills to the next level? 🚀 Turn product knowledge into hands-on know-how with our .Wonderi...
09/09/2026

Ready to take your service skills to the next level? 🚀

Turn product knowledge into hands-on know-how with our .

Wondering what to expect?

We’ve put everything you need to know about the training in one place.

There’s still time to get on board 👇

Service Training - November 2026
Service Training - December 2026

1️⃣ Pick your training.
2️⃣ Reserve your spot.
3️⃣ Get ready to level up.

01/09/2026

💥What if you could cut your plate processing time by up to 60%?

In , speed means nothing without .

Our Flex-Line 520 XP is designed to deliver both - helping converters increase productivity while maintaining exceptional print .

Discover what makes Flex-Line 520 XP stand out:

✅ End to end plateprocessing finishing – fully automized
✅ 50–60% time savings
✅ Enhanced quality control
✅ Higher throughput
✅ Consistent plate finishing
✅ Maximum production uptime

👀 Explore how Flex-Line 520 XP combines smart engineering and advanced to support smoother, more efficient production - day after day. 👇

☝First customer feedback on is in — and the early results are encouraging.One of our early HALO customers has now comp...
25/08/2026

☝First customer feedback on is in — and the early results are encouraging.

One of our early HALO customers has now completed the first phase of technical evaluation in a resin development environment.

The headline result:

Back exposure time was reduced by approximately 26%.

In their evaluation, measured irradiance increased from approximately 12 mW/cm² with their conventional mercury lamp system to 19 mW/cm² with HALO.

To achieve the target relief depth, this translated into an effective back exposure time reduction from approximately 52.5 seconds to 38.9 seconds.

Beyond exposure time, the customer also observed an interesting plate-performance balance:

👉 Improved highlight dot reproduction versus conventional mercury lamp exposure
👉 Deeper reverse lines compared with the LED system used as a benchmark
👉 Plate characteristics positioned between conventional mercury exposure and higher-intensity LED exposure

And implementation?

Straightforward. Minimal effort. No significant additional operator training required.

The customer also highlighted another practical benefit of :

no lamp warm-up time, with the potential to improve equipment availability and operational efficiency.

There is still more to learn. Relief exposure optimization is ongoing, printing trials have not yet been completed, and longer-term production data will be needed to quantify uptime, maintenance and energy benefits.

That is exactly why early customer evaluations matter.

They move the conversation from specifications to measured performance — and help us understand where HALO can create the most value in real plate-making workflows.

A very promising first real production data point for HALO.

18/08/2026

⚡Better productivity doesn't have to mean more effort.

What if your team could spend less time on manual work while reducing operating costs at the same time?

In the final part of our customer story, Frank Flexo shares how Glunz & Jensen equipment has simplified daily operation, increased productivity and helped reduce energy consumption.

Sometimes, the biggest improvements are the ones your operators notice every single day.

▶️ Watch the final chapter 👇

Adresse

Selandia Park 1
Ringsted
4100

Website

Underretninger

Bliv den første, der får besked: Vi sender dig en e-mail, når Glunz & Jensen offentliggør nyheder og tilbud. Din e-mailadresse bliver ikke brugt til andre formål, og du kan til enhver tid afmelde dig.

Kontakt Virksomheden

Send en besked til Glunz & Jensen:

Genveje

Del