Shenzhen Huihe Circuits Co., Ltd.

Shenzhen Huihe Circuits Co., Ltd. PCBSky is a professional PCB & Flex PCB company in China, specializing in Quick Turn PCB & Prototypes.

We are not just a PCB Maker, but rather a full-service PCB Supplier.

Impedance Control PCBThe impedance line width tolerance of our Impedance Control in PCB is normally controlled by ± 10%,...
03/12/2022

Impedance Control PCB

The impedance line width tolerance of our Impedance Control in PCB is normally controlled by ± 10%, and the minimum can be controlled to ±8%. In order to reduce the production cost, if the signal requires impedance deviation of ±10%, then we do not need to require the board factory to produce according to ±8%, resulting in unnecessary cost increase.

Find more: https://www.pcbsky.com/impedance-control-pcb.html

Gold Fingers PCBGold Finger (Gold Finger Connector or Edge Finger Connector) inserts one end of the printed circuit boar...
03/12/2022

Gold Fingers PCB

Gold Finger (Gold Finger Connector or Edge Finger Connector) inserts one end of the printed circuit board into the connector card slot, and uses the connector pin as the external connection of the printed circuit board, so that the pad or copper is in contact with the corresponding pin.

Read more: https://www.pcbsky.com/gold-fingers-pcb.html

Rigid flex PCBRigid flex PCB are rigid boards that use a combination of flexible and rigid board technology in one appli...
01/12/2022

Rigid flex PCB

Rigid flex PCB are rigid boards that use a combination of flexible and rigid board technology in one application. Most rigid flex boards consist of multiple layers of flexible circuit substrate attached to one or more rigid external and / or internal boards, depending on the design of the application. The flexible substrate is designed to be in a continuous flex state and is often formed into curves during manufacturing or installation.

Visit more: https://www.pcbsky.com/rigid-flex-pcb.html

PCB AssemblySelf-developed SMT patch online quotation ordering system, the quotation is accurate and hidden, the procure...
29/11/2022

PCB Assembly

Self-developed SMT patch online quotation ordering system, the quotation is accurate and hidden, the procurement is efficient and convenient; the production of ERP system in the docking factory, the order situation is unobstructed, the production plan is controlled at any time, so that your PCBA and circuit board projects are in good condition.

Visit more: https://www.pcbsky.com/pcb-assembly.html

PCB LayoutIn the past 8 years, pcbsky has persisted in focusing on the main channel of electronics and resisting all tem...
29/11/2022

PCB Layout

In the past 8 years, pcbsky has persisted in focusing on the main channel of electronics and resisting all temptations; it has insisted on not taking short cuts, rejecting opportunism, being down-to-earth, putting in a long-term investment, accumulating and accumulating thinly; adhering to the customer-oriented, the striver oriented, long-term arduous struggle and self-criticism.

Visit more: https://www.pcbsky.com/pcblayout.html

Aluminium Core PCBAluminium Core PCB is a metal-based copper clad laminate with good heat dissipation function. Generall...
18/11/2022

Aluminium Core PCB

Aluminium Core PCB is a metal-based copper clad laminate with good heat dissipation function. Generally, the single panel is composed of a three-layer structure, which is a circuit layer (copper foil), an insulating layer and a metal base layer. Also used for high-end use is designed as a double panel, the structure is circuit layer, insulation layer, aluminum base, insulation layer, circuit layer. A very small number of applications are multi-layer boards, which can be made of ordinary multi-layer boards combined with an insulating layer and an aluminum base.

Find more: https://www.pcbsky.com/aluminium-core-pcb.html

Ferrum Core PCBThe Ferrum Core PCB is a metal heat sink substrate applied to high-end motors, high-end products and moto...
18/11/2022

Ferrum Core PCB

The Ferrum Core PCB is a metal heat sink substrate applied to high-end motors, high-end products and motors. It is widely used in the market. The hardness of the Ferrum Core PCB is much larger than that of the Aluminium Core PCB. It is difficult for general manufacturers to master. The technology, cost cost and scrap rate are relatively high.

Found more: https://www.pcbsky.com/ferrum-core-pcb.html

18/11/2022

You may either construct the printed circuit board (PCB) prototype yourself or contract out its production to a company that specializes in PCB prototype assembly if you are creating a product and...

Copper Core PCBCopper-based PCBs use copper as a primary base material in place of commonly used FR4. The copper base ma...
18/11/2022

Copper Core PCB

Copper-based PCBs use copper as a primary base material in place of commonly used FR4. The copper base material is then covered with an insulating layer followed by a circuit layer. Copper core/based PCBs are known to have excellent heat dissipation and can be used for high frequency applications with minimal variation in performance over wide temperature ranges. However, these advantages do come at a cost (literally), Cu Core PCB’s are vey expensive.

Read more: https://www.pcbsky.com/copper-core-pcb.html

Rogers PCBRogers is a global leader in engineered materials to power,protect and connect our world.We are passionate abo...
14/11/2022

Rogers PCB

Rogers is a global leader in engineered materials to power,protect and connect our world.We are passionate about helping the world’s leading innovators solve their toughest material challenges.Rogers is headquartered in Chandler,Arizona,USA, and manufacture products in the U.S.,China,Japan,Korea,Germany,Hungary and Belgium.Their innovative solutions empower the customers’ technological breakthroughs

Read more: https://www.pcbsky.com/rogers-pcb.html

Hybrid PCBsMulti-layer high-frequency circuit board design, based on cost savings, improved bending strength, electromag...
14/11/2022

Hybrid PCBs

Multi-layer high-frequency circuit board design, based on cost savings, improved bending strength, electromagnetic interference control and other factors, high-frequency mixed-voltage circuit boards often appear in the form of mixed-pressure boards, called high-frequency mixed-pressure boards. The design of high-frequency mixed-pressure materials and the combination of stacked combinations are numerous and numerous. Through the research and development, Mingyi Electronics has produced a multi-layer high-frequency circuit board, which uses a combination of high-frequency materials RO4350B/RO4450B and FR4 materials mixed dielectric laminate pcb.

Get more: https://www.pcbsky.com/fr4-high-frequency-pcb.html

PTFE Teflon PCBThe PTFE Teflon PCB is suitable for use in electrical insulation materials and linings, supporting slider...
14/11/2022

PTFE Teflon PCB

The PTFE Teflon PCB is suitable for use in electrical insulation materials and linings, supporting sliders, rail seals and lubricating materials for electrical insulating materials and contact corrosive media. It is used in light industry in rich cabinet furniture. It is widely used in chemical, pharmaceutical, dye container, storage tank, reaction tower kettle, anti-corrosion lining material for large pipelines; heavy industry such as aviation and military; mechanical, construction, traffic bridge slider, guide rail; printing and dyeing, light industry, textile Industry’s anti-adhesive materials, etc.

See more: https://www.pcbsky.com/ptfe-teflon-pcb.html

Address

407, Kanglan Fortune Center, Fuzhou Avenue, Fuyong Stree
Shenzhen
518103

Website

Alerts

Be the first to know and let us send you an email when Shenzhen Huihe Circuits Co., Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shenzhen Huihe Circuits Co., Ltd.:

Shortcuts

Share

Category